Features:
To clone 125Khz RFID card/Tag
Support 125Khz EM4100/EM410X or compatible card / label format
Copy EM4100 all ID cards, such as access cards, mobile cards, parking cards, etc
Able to reference the device module when you work.
Easy to use.
No computer needed.
 
Description:
2 buttons for Simple operations!
Built-in individual LED lights and buzzer indicator,transceiver antenna.
Read / Writable card & keyfobs can be cloned and copied > 20000 times with difference IDs.
 
Specification:
Working frequency: 125Khz
Power: Two piece AAA battery，it can be use 20,000 times.(Batteries are not included)
Distance: ≤25mm （keyfob), ≤60mm（card）
Supported blank tag：T5557,EM4305
Dimension: 110*67*30 mm
Weight: 89g
Button：Read Button，Write Button

How to clone:
1.Press the power switch on the right side of the device, it will stay two or three times, and the LED lights up to mean it works, if not restart.
2.Place another card near the antenna on the left side of the device, then press the READ button, the device will remain and the LED will be on when the reading is successful. If you make 2 beeps, go to step 3, if 3 beeps are sounded. Go to step 4, click if you don’t make a beep, read again
3.Change the new blank card to T5557 / EM4305, then press the WRITE button. When the beep PASS LED is lit, the average clone is successful. If there is no beep, please light it again.
4.Change the blank T5557, then press the WRITE button. When the beep PASS LED is lit, the average clone is successful. If there is no beep, please light it again.
5.If you want to make more of the same ID card, repeat step 3 or step 4.
6.Turn off to save power.