Description:

LJC30A3-H-Z/BY   Capacitance Proximity Sensor Switch PNP NO DC6-36V 30mm Diameter.

It is a component widely used in automatic control industry for detecting, controlling, and noncontact switching
When proximity switch is close to some target object, it will send out control signal.

Features:

Power supply reversal connection protection , short-circuit protection , can directly connect with PLC
Economic and simple operation
Long service life, high reliability and strong resistance property to environment
Red LED indicates that it’s available to detect the sensor operating state.
IP67 protection structure (IEC specification)
 
Characteristic parameter:
Type: PNP NO
Mounting way: Non-screen shield type
Detection distance: 25mm±10%
Set distance: 0-13mm
Standard detection object : SPCC 50 x 50 x 1 mm
Response frequency: 0.5 kHz
Delay distance: 10% below of the detection distance
Detection object: Can detect any dielectric
Supply voltage: DC 6-36V
Consumption current: Below 13mA
Control output :  Below 300 mA
Loop protection: Reversal connection protection, surge absorption, load short-circuit protection
Ambient temperature & humidity: -30~+65 °C, 35~95% RH
Insulation impedance: Above 50 MΩ between charging part and housing
Withstand voltage: AC 1000V 50/60Hz 1min between charging part and housing
Protection structure: IP67 (IEC specification)
Material: Nickel plated brass, ABS