!!CLEARANCE: UNIT IS FULLY FUNCTIONING BUT COMES WITH COSMETIC DEFECT SUCH AS DENT, MISSING COVER, NOISE, ETC - BUY ONLY IF YOU CAN ACCEPT THIS !!

Features:

100% full load burn-in test
Universal AC input / full range
It's good quality and high performance
Protections: overload/ over voltage/ short circuit
Cooling by free air convection (Not recommended for use in bathroom)


Applications:

PLC & Industrial Control System, CCTV, LED Strip, Communication Equipment, Home Electrical Appliances, Building Lighting, Traffic Control Signal, Stepper Motor, Electronics Project.

Specifications:

Input voltage: 110-240V
Output voltage: 12V 1A / 2A / 3A / 4A / 5A / 8.5A / 10A / 12.5A / 15A / 20A / 25A / 30A / 40A 50A

Connections:

AC: Alternating Current
DC: Direct Current
L/N: Connect Alternating Current
-V (COM): Output Negative
+ V: Output Positive (The output polarity can't be reversed.)
FG: Connect Ground Wire
ADJ: Output Voltage Trimmer
L, N: AC power input
GND: DC power output "-"
V: DC power output "+"
+V / ADJ: Adjust the output voltage


Product Dimensions:

12V 1A : 70x40x30mm
12V 2A : 85x58x33mm
12V 3A : 85x58x33mm
12V 4A : 85x58x33mm
12V 5A: 85x58x33mm | 110x78x37mm
12V 8.5A: 130x98x40mm
12V 10A:160x98x42mm
12V 12.5A:199x98x42mm
12V 15A:160x100x40mm (while stock lasts) OR 200x100x40mm (new stock)
12V 20A:199x110x50mm
12V 20A(FAN): 199x110x50mm
12V 25A(FAN): 199x110x50mm
12V 30A(FAN): 214x115x50mm
12V 40A(FAN): 214x115x50mm
12V 50A(FAN): 243x118x68mm